3D assembly guide · SimXPro XT160 with CoreBolt

Build your XT160. Step by step.

Nine steps from box to cockpit. Watch every profile, plate and bolt move into place in 3D, and see how the hidden CoreBolt joints go together.

You've got this.
Steps
9
Profiles
15
Footprint
± 1300 × 650 mm
Joints
CoreBolt
SimXPro XT160 Sim Racing Cockpit
T-handle hex keyLong side to turn bolts in and through the Ø6.5 mm CoreBolt holes. Short side for the final turn.
Drilled positionsThe holes show you where the cross profiles go.
Two peopleThe big base profiles are easier to handle together.
Sort firstProfiles by length, hardware by size.

Interactive manual

Assembly in 3D

Drag to rotate · Right-click to move · Scroll to zoom · Arrow keys for steps

Loading the 3D model…

New generation · XT160

CoreBolt. Hidden joints, clean lines.

The base frame joints of the new XT160 go together without brackets or T-nuts. Each bolt sits inside the profile, and you tighten it through a small access hole.

That's it.

  1. 1

    Turn inTurn two M8×16 bolts part-way into the end of the cross profile.

  2. 2

    Slide inSlide the bolt heads into the grooves of the base profile.

  3. 3

    Line upMove the cross profile to its drilled hole. The hole tells you where.

  4. 4

    TightenHex key through the Ø6.5 mm hole and tighten. The heads stay out of sight.

Prefer to watch?

The full XT160 build on video

The official SimXPro assembly video, from loose profiles to a finished frame.

Take your time.